© 2022, Carl Zeiss Meditec AG, Jena
All rights reserved in the event of granting of patents or registration as a utility pa-
tent.
All names of companies and products cited in this documentation set may be trade-
marks or registered trademarks. References to products of other manufacturers are
for information purposes only. Such references are intended neither as an approval
nor a recommendation of these products. Carl Zeiss Meditec AG accepts no liability
for the performance or use of such products.
Other brand names, software and hardware names used in this documentation set
are generally subject to trademark or patent protection. The quoting of products is
for informational purposes only and does not represent a trademark misuse.
The weblinks are dynamic hyperlinks. Before incorporating any links, Carl Zeiss Medi-
tec AG checks their content to ensure that it is not likely to result in civil or criminal
liability. It does not, however, continuously check for any changes which could form
the basis for liability. If Carl Zeiss Meditec AG determines that a link which it has in-
corporated could result in civil or criminal liability, or is alerted to the fact by a third
party, the link will be removed.
This documentation set is protected by copyright. Unless expressly authorized in
writing, dissemination, duplication or other commercial exploitation of this docu-
ment or communication of its contents or parts of it is not permitted. In case of in-
fringement, the violator may be liable to pay compensation for damages.
Specifications due to technical developments are subject to change. This documen-
tation set is not subject to the revision service. Please contact the manufacturer or
authorized dealer to request the latest edition of the documentation set.