Operation of the instrument
000000-1865-713-GA-en-US-080622
Printing the reference image
Once the measurements have been completed, the readings and the
reference image can be printed.
The following print formats are supported (upright format only): A4
(210 x 297 mm), Letter (8.5” x 11.0”), B5 (182 x 257 mm).
The printout of the readings may be started in the Option Reference Image
mode. The printout will include all results obtained so far (also those of the
other eye, if already available). It is advisable to start the printout only if all
results of both eyes are available.
Do not take any further measurements during the printing process.
Click on the Print icon or press <P> to print out measurement values.
To print out the reference image use the Print graph button or press the
<CTRL> and <P> buttons.
To Next Page