EasyManua.ls Logo

ZENEC ZE-MC192 - 17. Spezifikationen

ZENEC ZE-MC192
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67
DEUTSCH
17. SPEZIFIKATIONEN
CEA power ratings
Main amplifier
Power output: 35 Watts RMS x 4 channels into 4 Ohms @ < 10% THD+N
Signal to noise ratio: 70dBA below reference. (Reference: 1 Watt, 4 Ohms)
MAX power: 50 x 4 Watts into 4 Ohms, all channels driven
Frequency response: 20Hz to 20kHz, -3dB. Aux input used as source reference
Reference supply voltage: 14.4VDC
DVD/CD player
Compatible formats: DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW, CD-DA, MP3,
WMA, HDCD, SVCD, VCD, MPEG, JPEG, MP3/WMA files burned onto a DVD+R/W or
DVD-R/W and CD-R/RW
Signal to noise ratio: 85dBA
Dynamic range: >95dB
Frequency response: 20Hz to 20kHz, -3dB
Channel separation: > 60dB @ 1kHz
D/A converter(s): 5-channel high performance 24-bit, 192kHz, multi-bit Delta Sigma
modulation. DAC supports sample rates from 8~192kHz.
Electronic skip protection (ESP):
DVD: 2-3 sec, CD-DA: 10 sec, MP3: 100 sec, WMA: 200 sec
(ESP time is approximate)
Mechanical anti vibration ability: 10~200Hz, X/Y/Z direction: 1.0G
Video section
Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm), buffered
Input: 1Vp-p (75-ohm)
FM tuner section
Tuning range: 87.5MHz – 107.9MHz
Mono sensitivity (–30dB): 10dBu
Quieting sensitivity (–50dB): 15dBu
Alternate channel selectivity: 70dB
Signal to noise ratio @ 1kHz: 58dB
Image rejection: 60dB
Stereo separation @ 1kHz: 30dB
Frequency response: 30Hz – 15kHz, –3dB
ZE-MC192 Manual D+E def.indd 67 13.09.2007 17:32:42 Uhr

Table of Contents

Other manuals for ZENEC ZE-MC192

Related product manuals