What to do if my ZENEC Z-E2015 Car Receiver will not power on?
If your ZENEC Car Receiver won't power on, there are several potential causes: * A blown radio fuse: Install a new fuse with the correct rating. * A blown car battery fuse: Install a new fuse with the correct rating. * Illegal operation: Press the RESET button.
Why is there no audio output from my ZENEC Z-E2015?
If you are experiencing no or low audio output from your ZENEC Car Receiver, consider these potential causes: 1. Improper audio output connection: Check the wiring and correct it. 2. Volume set too low: Increase the volume level. 3. Speakers damaged: Replace the speakers. 4. Only one channel is playing: Check the balance and fader adjustments. 5. Speaker wiring in contact with metal part of car: Insulate all speaker wiring connections or replace the speaker cable. 6. Mute is activated: Turn off the Mute function.
What causes poor sound quality on ZENEC Z-E2015?
If the sound quality from your ZENEC Car Receiver is poor or distorted, it could be due to: * Speaker power rating not compatible with unit: Connect proper speakers. * Speaker is shorted: Check speaker connections.
What to do if there is no image on my ZENEC Z-E2015 Car Receiver?
If there is no image on your ZENEC Car Receiver, it may be because: * The parking brake is not engaged: Stop the vehicle in a safe place and apply the parking brake. * The "Monitor off"-function is activated: Touch the monitor to activate the display.
Controls device power on/off and audio mute function.
Opens the Main Menu or EQ page.
Adjusts volume and turns the device on/off.
Enters navigation mode or switches playback source.
Enters Bluetooth mode and activates voice command.
Navigates menus and confirms selections.
Initiates hardware and software reset.
Controls device power on/off.
Mutes or unmutes the audio output.
Changes the audio/video source.
Adjusts volume level using VOL+ and VOL- buttons.
Navigates tracks or fast forwards/rewinds.
Performs play/pause actions and confirms selections.
Adjusts audio volume level.
Mutes or unmutes the audio output.
Navigates tracks, chapters, or stations.
Answers, ends, or denies calls; activates voice commands.
How to turn the device on and off.
Procedure for choosing different audio/video sources.
Navigating through the device's main menu pages.
Procedure for setting the device's language.
Description of indicators and information shown on the radio screen.
Explanation of buttons and controls for radio operation.
How RDS text provides additional station information.
Details on AF, TA, AS, SCAN, REG, and LOC/DX functions.
Controls for managing playback of CD/DVD media.
Controls for managing playlists of CD/DVD media.
How to search for specific tracks within CD/DVD sources.
Controls for playing video files from CD/DVD.
Controls for managing playback of USB media.
Controls for managing playlists from USB media.
How to search for tracks, albums, etc. on USB.
Controls for playing video files from USB.
Managing multiple USB memory devices via USB Hub.
Generating playlists based on Gracenote metadata.
Saving and managing generated playlists.
Controls for managing playback of iPod/iPhone media.
Controls for managing playlists from iPod/iPhone.
How to search for tracks, albums, etc. on iPod/iPhone.
Controls for playing video files from iPod/iPhone.
Information on potential delays in search results.
Notes on extended information display on the Playlist Page.
Restriction on connecting multiple iPod/iPhone devices to the USB hub.
Overview of the main menu options for Bluetooth functions.
Managing device connections and pairing settings.
Information on automatic connection of paired mobile phones.
Procedures for pairing mobile phones using SMART or PIN modes.
Accepting, dialing, and switching between calls.
Managing phonebook entries, searching, and saving contacts.
How to search for contacts using the keypad.
Accessing and viewing missed, outgoing, and incoming calls.
Troubleshooting and tips for phonebook sync issues.
Adding, calling, and deleting favorite contacts.
Step-by-step guide to pairing a new mobile phone.
Option to abort an ongoing Bluetooth pairing process.
Important notes on device visibility, connection range, and compatibility.
Information displayed during A2DP streaming.
Controls for managing A2DP audio playback.
Requirements and notes for using A2DP streaming.
Methods to activate voice control via device buttons or touchscreen.
How to issue commands and system feedback.
A table of common voice commands and their functions.
How to select or change the voice command language.
How to search for and enter a destination address.
Process of calculating and starting a route.
Important notes on audio playback and volume during navigation.
Navigating the main system setup screen and its submenus.
Procedure for exporting device settings to a USB drive.
Procedure for importing device settings from a USB drive.
Adjusting screen brightness for day/night modes.
Selecting different visual skins for the interface.
Activating and exiting the device's standby mode.
Adjusting volume levels for various functions and sources.
Activating and using the Gracenote database for sorting.
Fine-tuning audio output with EQ, fader, and balance controls.
How system time is updated via GPS.
Configuration of driver assistance features.
Customizing ALT button and reverse mute functions.
Setting OSD and Bluetooth voice command languages.
Choosing key illumination colours.
Managing system settings via USB for backup and restore.
Displaying installed system software versions.
Activating password protection and anti-theft features.
Procedure for launching and performing software updates.
Accessing the M-Zone from the main menu.
Important considerations for using the M-Zone feature.
Accessing DVB-T or DAB+ sources directly.
Navigating program lists and returning to the main menu.
Requirements and compatibility for DVB-T/DAB+ devices.
Controls operated via the touchscreen interface.
Details screen resolution and LED illumination.
Feature for generating playlists based on music metadata.
Bluetooth module with DSP for hands-free calls.
Software-controlled code to prevent hardware theft.
Troubleshooting when the unit will not power on.
Resolving issues with no or low audio output.
Addressing poor sound quality or distortion.
Troubleshooting missing images on the TFT monitor.
Details on navigation system features and capabilities.
Features of the integrated Parrot Bluetooth module.
Supported media formats and audio processing.
Overview of the device's main features and display.
Conditions that void the product warranty.
Guidance on checking device compatibility with phones and iPod/iPhone.
Statement regarding accuracy and liability for manual content.
Terms of use for Gracenote software and data.
Controls device power on/off and audio mute function.
Opens the Main Menu or EQ page.
Adjusts volume and turns the device on/off.
Enters navigation mode or switches playback source.
Enters Bluetooth mode and activates voice command.
Navigates menus and confirms selections.
Initiates hardware and software reset.
Controls device power on/off.
Mutes or unmutes the audio output.
Changes the audio/video source.
Adjusts volume level using VOL+ and VOL- buttons.
Navigates tracks or fast forwards/rewinds.
Performs play/pause actions and confirms selections.
Adjusts audio volume level.
Mutes or unmutes the audio output.
Navigates tracks, chapters, or stations.
Answers, ends, or denies calls; activates voice commands.
How to turn the device on and off.
Procedure for choosing different audio/video sources.
Navigating through the device's main menu pages.
Procedure for setting the device's language.
Description of indicators and information shown on the radio screen.
Explanation of buttons and controls for radio operation.
How RDS text provides additional station information.
Details on AF, TA, AS, SCAN, REG, and LOC/DX functions.
Controls for managing playback of CD/DVD media.
Controls for managing playlists of CD/DVD media.
How to search for specific tracks within CD/DVD sources.
Controls for playing video files from CD/DVD.
Controls for managing playback of USB media.
Controls for managing playlists from USB media.
How to search for tracks, albums, etc. on USB.
Controls for playing video files from USB.
Managing multiple USB memory devices via USB Hub.
Generating playlists based on Gracenote metadata.
Saving and managing generated playlists.
Controls for managing playback of iPod/iPhone media.
Controls for managing playlists from iPod/iPhone.
How to search for tracks, albums, etc. on iPod/iPhone.
Controls for playing video files from iPod/iPhone.
Information on potential delays in search results.
Notes on extended information display on the Playlist Page.
Restriction on connecting multiple iPod/iPhone devices to the USB hub.
Overview of the main menu options for Bluetooth functions.
Managing device connections and pairing settings.
Information on automatic connection of paired mobile phones.
Procedures for pairing mobile phones using SMART or PIN modes.
Accepting, dialing, and switching between calls.
Managing phonebook entries, searching, and saving contacts.
How to search for contacts using the keypad.
Accessing and viewing missed, outgoing, and incoming calls.
Troubleshooting and tips for phonebook sync issues.
Adding, calling, and deleting favorite contacts.
Step-by-step guide to pairing a new mobile phone.
Option to abort an ongoing Bluetooth pairing process.
Important notes on device visibility, connection range, and compatibility.
Information displayed during A2DP streaming.
Controls for managing A2DP audio playback.
Requirements and notes for using A2DP streaming.
Methods to activate voice control via device buttons or touchscreen.
How to issue commands and system feedback.
A table of common voice commands and their functions.
How to select or change the voice command language.
How to search for and enter a destination address.
Process of calculating and starting a route.
Important notes on audio playback and volume during navigation.
Navigating the main system setup screen and its submenus.
Procedure for exporting device settings to a USB drive.
Procedure for importing device settings from a USB drive.
Adjusting screen brightness for day/night modes.
Selecting different visual skins for the interface.
Activating and exiting the device's standby mode.
Adjusting volume levels for various functions and sources.
Activating and using the Gracenote database for sorting.
Fine-tuning audio output with EQ, fader, and balance controls.
How system time is updated via GPS.
Configuration of driver assistance features.
Customizing ALT button and reverse mute functions.
Setting OSD and Bluetooth voice command languages.
Choosing key illumination colours.
Managing system settings via USB for backup and restore.
Displaying installed system software versions.
Activating password protection and anti-theft features.
Procedure for launching and performing software updates.
Accessing the M-Zone from the main menu.
Important considerations for using the M-Zone feature.
Accessing DVB-T or DAB+ sources directly.
Navigating program lists and returning to the main menu.
Requirements and compatibility for DVB-T/DAB+ devices.
Controls operated via the touchscreen interface.
Details screen resolution and LED illumination.
Feature for generating playlists based on music metadata.
Bluetooth module with DSP for hands-free calls.
Software-controlled code to prevent hardware theft.
Troubleshooting when the unit will not power on.
Resolving issues with no or low audio output.
Addressing poor sound quality or distortion.
Troubleshooting missing images on the TFT monitor.
Details on navigation system features and capabilities.
Features of the integrated Parrot Bluetooth module.
Supported media formats and audio processing.
Overview of the device's main features and display.
Conditions that void the product warranty.
Guidance on checking device compatibility with phones and iPod/iPhone.
Statement regarding accuracy and liability for manual content.
Terms of use for Gracenote software and data.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Bluetooth | Yes |
| Power Output | 4 x 50 Watts |
| DVD Player | Yes |
| CD Player | Yes |
| SD Card Reader | Yes |
| Operating System | Windows CE 6.0 |
| Radio | FM/AM |
| Steering Wheel Control | Yes |
| Rear View Camera Input | Yes |
| USB Ports | 2 |
| Audio Formats Supported | MP3, WMA, AAC, WAV |
| Video Formats Supported | AVI, MP4, WMV |
| Navigation | Yes |
To Next Page
