1 INTRODUCTION
1.1 DALIBOX INTERFACE 64/32
DALIBOX Interface 64/32 from Zennio is a KNX-DALI gateway that allows controlling,
dimming and monitoring up to 64 ballasts (in up to 32 groups) in a DALI bus by means
of KNX communication objects, which makes it possible to integrate the DALI installation
into the building automation system.
Their main functions are:
General ballast control through universal DALI commands.
Support for up to 64 DALI ballasts in total,
110V or 230V power supply.
Ballast control by groups (up to 32).
Ballast swap with automatic address re-assignment.
Light regulation with customisable dimming limits and times.
Selection between logarithmic and linear regulation curve.
Support for the Converter modules.
Lock function.
Timed actions: simple timers, flashing sequences and automatic switch-off.
Scenes and sequences.
Custom On/Off controls.
Standby Mode to help save power consumption in the ballasts by controlling
the power supply to the output groups.
Error detection and notification.
To Next Page
Loading...