7
PLEASE NOTE: YOUR ZERO-X GLYDEN DRONE COMES WITH
A CERTIFIED ZERO-X USB AC CHARGING ADAPTOR FOR 240V
CHARGING OF YOUR DRONE BATTERY. USE OF A NON
ZERO-X CERTIFIED USB AC CHARGING ADAPTOR WILL
VOID YOUR WARRANTY AND MAY DAMAGE BOTH YOUR
BATTERY AND DRONE.
• Press the buckle and pull out the battery from the your Drone.
• Connect the Drone battery to the charging cable. The light will
glow red to indicate that the battery is charging. The LED on the
USB charging cable, will turn off once charging is complete.
• Once the battery is running out of power, the light of drone will
start to blink. It is vital that the Drone is flown back to the user, to
avoid the Drone losing power mid-flight and becoming lost.
• To maximise your battery life, avoid removing the battery from
the charging cable before charging is complete. If you have just
finished flying your Drone, please allow the battery to cool down
for at least 30 minutes before recharging.
• The Drone battery may take up to 2.5 hours to fully charge. If the
battery has been on charge for any longer than 3.5 hours and the
indicator on the charging cable is not showing that the battery is
charged, please remove the battery from the charger.
• Remove the Drone from the charger as soon as it is fully
charged. Overcharging the Drone may damage the battery and
reduce flight time.
To Next Page
Loading...
