Zetor CRYSTAL HD 170 - Rear PTO shaft switch - dependent speed - ordinary mode of operation

Deactivation of the rear PTO shaft - independent revolutions
FHD18N050
A
- By pressing the button on the panel on right fender or the button on the rear fender of the tractor
the rear PTO shaft turns off.
B - This status is signaled by not showing the number of revolutions of the rear PTO on the
dashboard display.
C - Move the PTO shaft speed lever to neutral position (n).
D - This status is signaled by displaying the N symbol instead of the number of selected rear PTO
s
p
eeds on the dashboard dis
p
la
y.
DRIVE OF AGRICULTURAL MACHINERY
140