EasyManua.ls Logo

Zetor CRYSTAL HD 170 - Speed of tractor with engine revolutions of 2 100 rpm and parameter of rear wheels (km;h)

Zetor CRYSTAL HD 170
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Permitted combinations of wheels for tractors
Performance on rear PTO shaft
Lifting force of the three-point hitch
Combination
Front wheels Rear wheels
dimension of tyre equivalent dimension of tyre equivalent
1
16,9-24
420/85R24
480/70R24
540/65R24
14,9-28
380/85R28
420/70R28
480/65R28
16,9R24
14,9R28
18,4-38
460/85R38
520/70R38
600/65R38
18,4R38
2
16,9-28
420/85R28
480/70R28
540/65R28
16,9R28
520/85R38
580/70R38
650/65R38
20,8R38
Power on PTO shaft Tractor type
CRYSTAL 150 CRYSTAL 170
Pto power (kW ± 2%)
- at rated engine speed and pto rated
speed 1,000 rpm
Engine run-in (after 100 EH) 93.7 kW 101.6 kW
Tensile force
Lifting force at the end of the bottom
draw-bars of the rear three-point hitch in
the whole lifting range at the maximum
usable pressure (kN).
76
Lifting force at the end of the lower draw-
bars of the front three-point hitch in the
whole lifting range at the maximum
usable pressure (kN) - Zuidberg front
three-point hitch
35
Tractor type Crystal 150 Crystal 170
Maximum tensile force (kN) in the swinging
rod on the concrete, tractor in standby with
HS ballast, up to 15% slippage
53 54
MAIN TECHNICAL PARAMETERS
219

Table of Contents

Related product manuals