EasyManua.ls Logo

Zetor CRYSTAL HD 170 - Permitted maximum load of front axle (kg); Permitted maximum load of rear axle (kg); Permitted maximum weight of set tractor + mounted machine (kg); Manoeuvrability condition

Zetor CRYSTAL HD 170
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Main tractor's parameters (mm)
Technical data of engines
ECE R24 - engine equipped with accessories - cooling ventilator
Note
Position length with the suspension
device with lowered front TPL
4388-5410
without additional
weights
Position length with the suspension
device with front TPL
4388-4692
without additional
weights
Width over rear mudguards 2117
Height to the exhaust muzzle 3040-3045
according to the tyre
dimensions
Height of the tractor to the cabin upper
edge
2965-3005
according to the tyre
dimensions
Clear height under the front axle beam 482-522
according to the tyre
dimensions
Height of the flat mouthpiece in the
highest position (centre of the
mouthpiece)
1087
Wheelbase 2850
Tractor type Crystal 150 Crystal 170
Engine type TCD6.1L6 TCD6.1L6
Engine design straight, standing, water cooled
Engine type diesel, four-stroke with direct fuel injection,
turbocharged with intercooler
Injection system Common Rail
Additional exhaust gas treatment Selective Catalytic Reduction (SCR)
Diesel Particulate Filter (DPF)
Number of Cylinders 6
Cylinders displacement
cm
3
6057
Bore x Stroke mm 101x126
Rated speed
min
-1
2100
Idle speed
min
-1
700
Injection order 1-5-3-6-2-4
Compression ratio 18
Max. power / engine speed (EC R24) kW / rpm 106.5/1800 120.1/1800
Specific fuel consumption @ 2,100 rpm g / kW.h 233.2 226.3
Max. torque (Mt) / engine speed Nm / rpm 664/1500 738.9/1500
Torque increase % 37.67 35.08
Minimal oil pressure at rated engine speed
and oil temperature 80 ° C
MPa 0.08
Coolant max temperature °C 110
MAIN TECHNICAL PARAMETERS
215

Table of Contents

Related product manuals