Hydrostatic steerin
Air cleaner
Cab filtration
z check tightness of screws and nuts of the control
rods and levers
z check state of all hoses of hydraulic control circuits
whether they are not damaged and oil is not leaking
C18N043
Repeated pressing the cup located on the bottom of the
air cleaner cover in the direction of the arrows will blow ou
the dirt caught in the air cleaner cover.
Perform other cleaning tasks:
- every day when working with front-mounted implements
or in a dusty environment
- every 100 engine hours.
- always when the relevant instrument panel light is on
See the chapter: Maintenance instructions
P18N102
Check and if necessary clean the cab ventilation air filters
installed in the front overhang of the roof.
The filter exchange interval depends on the dustiness of
the working environment.
Partial regeneration can be performed by beating out or
blowing with compressed air.
Do the cleaning or replacement of the filter elements after
removing the covering grills in the roof overhang.
At the customer's request we supply filters with active
carbon.
Don't clean the filter; don't flush it with
compressed air.
C18N044
PREVENTIVE DAILY MAINTENANCE
To Next Page
Loading...
