Insertion piece replacement of the oil cleaner with delivery
filter of the gearbox switchboard 206
Inspection of fouling of coolers 28
Instrument panel 53
Instrument panel - buttons 54
Instrument panel - instruments 54
Instrument panel - signal lamps 53
Instrument panel - warning 73
Internal lighting 34
Interrupted sound signal 96
L
Leaving the tractor 121
Level of external and internal noise 20
Lifting force of the three-point hitch 219
Lights switch 41
Lights switch between the grill and the cabin 41
Limitation of the upper position of the three-point hitch 156
Limiting draw-bars 162
Limiting travel speed 122
Liquid for the cooling system of the tractors 193
List of lamps 186
Location of serial numbers 11
Long-term shutdown of tractor 88
Low level of the cooling liquid 74
Lower draw bar with CBM hooks 163
Lowering speed 156
M
Machined area menu 70
Machined area record 72
Main technical parameters 215
Main tractor's parameters (mm) 215
Maintenance and treatment of tyres 212
Maintenance instructions 197
Manoeuvrability condition 216
Manual brake - signalization 116
Manual brake lever and coupling for semi-trailer control
lever 44
Manual setting of control of three-point hitch 157
Manual throttle 43
Maximum permissible vertical static load of hitches for
trailers and semi-trailers
129
Maximum transferred output 144
Minimum fuel amount in the fuel tank 51
Modular system of hitches for trailers and semi-trailers 127
Monthly performed actions 188
Motor oils 190
Multiplier preselection switch 106
N
Non-permitted starting 89
O
Oil for the front driving axle 190
Oil for the front driving axle 192
Oil in the gearbox and final drivehousing 190
Oil to gear systems of tractors 191
One-hose and two-hose brakes 119
One-hose brakes 119
Opening the door from the inside 31
Opening the door from the outside 31
Opening the hood 197
Operation of heating or air-condition with tractor´s work 48
Other recommended service fillings tested on Zetor tractors 191
Outer hydraulic circuit 146
P
Panel of the instrument panel 40
Passenger´s seat 36
Pedals and levers 43
Performance on rear PTO shaft 219
Permitted combinations of wheels for tractors 219
Permitted maximum load of front axle (kg) 216
Permitted maximum load of rear axle (kg) 216
Permitted maximum weight of set 'tractor + mounted
machine' (kg)
216
Plastic lubricant for the tractor 192
Preventive daily maintenance 25
Preventive daily maintenance 25
Preventive daily maintenance. 18
Principles for operating tractors equipped with front end
loader
22
Principles for safe handling of urea (AUS 32, DEF) 84
Procedure of draining liquid from the tyres 175
Procedure of filling the tyres with liquid 175
Processed area - user selection 70
Proper clothing 13
Proper function of the heating and air-condition system 47
Protection of cab against aerosols 19
PTO revolutions preselection lever 44
Q
Quick sinking 154
Quick-couplings with drip collection 146
R
Raw fuel filter clearing 200
Rear PTO shaft revolutions preselection lever 133
Rear PTO shaft switch - dependent speed - ordinary mode
of operation
141
Rear PTO speed lever position indication 79
Rear three-point hitch 161
Rear view mirrors 33
Rear wheel weights 173
Rear window 32
Rear window wiper 37
Reassembly of the air cleaner elements 203
Recovery of the mainair cleaner element 202
Reduction of the engine power and engine revolutions 87
Repairs and maintenance of the system of additional
treatment of exhaust gases 88
Replaceable end points of rear PTO shaft 132
Replacement of filter element of urea filter 208
Replacement of the transmission oil cleaner element with
hydraulic pump suction filter
206
Replacing coolant 204
Replacing full-continuous motor oil filter 199
Replacing the hydrostatic steering hoses 203
Replacing the safety element of the air cleaner 202
Replenish fuel 73
Reversing lever 43
Reversing lever 93
Reversing lever position signalization 93
Risk of the tractor overturning 15
Road and reduced speeds shifting lever 44
Road and reducing speeds lever position signalization 94
Running in the tractor 123
S
Safety cabin 31
Safety instructions for lubrication of the tractor 194
Safety instructions for users 13
Safety labels 23
Safety principles of working with the three-point hitch 162
Securing lower draw bars with CBM hooks 163
Selection switch of rear PTO clutch revolutions (P.T.O.) 133
Service inspections 187
Service menu 61
Setting automatic disengagement of PTO shaft clutch -
display description 135
Setting of steering sensors of the front axle 69
Setting oil flow through quick couplers 149
Setting the control of three-point hitch 156
Setting wheel stops with front drive axle 171
Shelf 33
Shifting road and reduced speeds 93
Short functional test 29
Side window 32
Signalization of a need to replace engine oil outside the
service interval
78
Signalization of multiplier function 105
Signalling errors in the system of additional treatment of
exhaust gases 91
Signalling of driver's seat 77
Specification of oil for the front driving axle 190
Specification of the oil for the gearbox housing and the final
drive housing
190
To Next Page
Loading...
