After about three seconds the main screen is displayed on the display.
1 - current coolant temperature
2 - current battery voltage
3 - current ambient air temperature
C18N014
1 - total operating hours (the value cannot be reset)
2 - operating hours of the tractor since the last reset of the
value
3 - total distance covered (the value cannot be reset)
4 - distance covered by the tractor since the last reset of
the value
P18N043
1 - Urea consumption
2 - DPF soot clogging degree
3 - DPF ash clogging degree
4 - Amount of urea in the tank in percents; if the amount of
urea in the tank is higher than 50% then OK symbol is
shown
C18N015
1 - Engine revolutions
2 - Engine load
3 - Instant fuel consumption
4 - Indication of selected engine speed preset memory
F18N055
To Next Page
Loading...
