Zida TX98-3D - ADVANCED CMOS SETUP

Motherboard Technical Specification
Page 24
ADVANCED CMOS SETUP
Quick Boot Set this option to Enabled to instruct AMIBIOS to boot quickly when the
computer is powered on. This option replaces the old Above 1 MB Memory Test
Advanced Setup option. The settings are:
1
st
Boot Device This option sets the type of device for the first boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Network, Floptical, SCSI, CDROM, IDE-0, IDE-1, IDE-2, or IDE-3.
The Optimal and Fail-Safe default settings are IDE-0
2nd Boot Device This option sets the type of device for the second boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Floppy, or IDE-0. The Optimal and Fail-Safe default settings are
Floppy.
3rd Boot Device This option sets the type of device for the third boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, CD-ROM, or IDE-0. The Optimal and Fail-Safe default settings are
CD-ROM.