C
chelseamooreSep 7, 2025
What to do if the hot tank in my Zip Water Filtration System is under filled?
- DDorothy NorrisSep 7, 2025
If your Zip Water Filtration System's hot tank is under filled, check the water supply to ensure adequate pressure.
To Next PageTo Next Page
What to do if the hot tank in my Zip Water Filtration System is under filled?
If your Zip Water Filtration System's hot tank is under filled, check the water supply to ensure adequate pressure.
How to troubleshoot a power board fault in a Zip Water Filtration System?
If your Zip Water Filtration System is experiencing a Power Board Fault, check the power supply and all fuses.
General| Model | HydroTap G4 |
|---|---|
| Category | Water System |
| Power Supply | 220-240V, 50Hz |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Boiling Water Capacity | Up to 160 cups per hour |
| Filter | Advanced filtration system |
| Safety | Child safety lock |
| Filtration | 0.2 micron |
| Energy Efficiency | Energy-saving mode |
| Warranty | 5 years |
| Chilled Water Capacity | Varies by model (e.g., up to 175 cups/hour) |
Instructions for configuring the tap's safety feature via the menu.
Steps to enable the safety lock directly from the tap.
Steps to disable the safety lock directly from the tap.
Explains touch-sensitive controls for dispensing water types.
Details operation of the two levers for dispensing water.
Instructions for dispensing chilled water on different HydroTap models.
Steps for dispensing boiling water when safety is off.
Steps for dispensing boiling water with safety lock engaged.
Indicates boiling water status (ready or below temperature).
Flashing light indicates a system fault requiring attention.
Shows filter status (off, flashing for replacement).
Step 1 for safety sensor calibration procedure.
Step 7 for checking calibration after adjustment.
Lists status messages like Safety OFF, System Fault, Sleep Mode.
Lists main menu categories: Language, Information, Installation, Service, Security, Communication, Settings.
Details for Date/Time, Temperature, Filter, Energy Modes, Safety, Dispense Time settings.
Instructions for flushing the filter system after installation or replacement.
Instructions to reset filter counters after replacing the filter.
Procedure and caution for calibrating boiling water temperature.
Section reserved for service technicians only; contact details provided.
Allows setting up a password to protect system settings.
Steps to set a 4-digit password for system settings access.
Functionality for using Wi-Fi to monitor and control the product remotely.
Accesses system settings like password, date/time, temperature.
Details on operating temperatures for boiling and chilled water.
Allows changing the maximum dispensing time for water.
Notifies when filter replacement is due and lists indicators.
Steps for opening unit, relieving pressure, and replacing cartridge.
Location, inspection, cleaning, and replacement of the air filter.
Step 1 of the CO2 bottle change procedure.
Step 11 of the CO2 bottle change procedure.
Step 15 of the CO2 bottle change procedure.
Recommended cleaning instructions using soft cloth and mild soap.
Icon indicating the safety switch is locked, preventing Boiling water dispense.
Displays the set temperature for boiling water.
Provides Zip Heaters (Aust) Pty Ltd contact information.
Telephone number for customer support and inquiries.
