X-Ray Inspection System
User Manual
Page | 32 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4.5.8 Adjusting Brightness
This feature helps to increase/decrease the brightness of the image.
Figure 4-13 Bright image
Figure 4-14 Dull image
4.5.9 DS(Dynamic Scan)
The images will be displayed dynamically using this function.
4.5.10 PS(Pseudo-color Display)
The single-energy equipment can be set to pseudo color display. The dual-energy
equipment can be set to color display.
All the inspected objects are displayed in different color levels of the spectrogram and
the color represents the actual X-Ray absorption degree of the object.
4.5.11 Suspicious Organics Enhancing feature of Z789
The atomic number of explosives and drugs are within the range [7,9]. The purpose of
this function is to highlight the substances with suspicious organics to be bright red and
the other substances be displayed in grey color. It’s helpful to view the suspicious
explosives and drugs. Z789 can be enabled by pressing the "E" key on the special-
purpose keyboard or wireless keyboard.
To Next Page
Loading...
Need help?
General
