X-Ray Inspection System
User Manual
Page | 42 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4.9.3 X-Ray Radiation Log
The log displays the usage time of X-Ray generator within the specified time range that
helps the administrator to track the working status of the equipment. The records can be
exported in the same way as explained above.
Figure 4-27 X-Ray Radiation Login
TIP(Threat Image Projection) 4.10
Based on the relevant parameters set by the administrator, the system can automatically
inset the luggage image containing dangerous articles into the images of scanned
articles or inset the dangerous articles of different kinds into the actual images of
inspected articles. Like normal images, TIP images will be saved automatically by the
system. From the statistical reports of the system, the administrator can know the correct
identification and the number of exclusions of each operator on the scanned dangerous
articles. And thus the administrator can get to know the image reading level and
efficiency of each operator. (After checking " " to initiate this function, it can operate
under image scanning mode and training mode.)
TIP purposes:
1) To enhance the vigilance of operators and to prevent exclusion of dangerous
materials.
To Next Page
Loading...
Need help?
General
