Chapter 1: Installation
7
6
66
6
While your computer is off, install the Wireless-G PCI Card
following the instructions below:
a
Take the cover off your computer.
b
On the rear of the computer, remove the metal cover
plate that lines up with a free PCI slot.
CAUTION
Electrostatic Discharge Protection
Static electricity can damage PCI card
components or your computer. Before
removing the PCI card from its antistatic
bag, touch the computer’s metal chassis
to statically discharge yourself.
c
Remove the PCI card from its antistatic bag and make a
note of the card’s serial number, which is located under
the bar code.
d
Slide the card firmly but carefully into the free PCI slot.
Be sure that the smaller gold finger edge of the card is
properly inserted into the connector. If you have a tower
or mini-tower computer case with a vertical main board,
lay the computer down on its side so you can push
straight down on the PCI card to seat it securely in its
slot.
To Next Page
Loading...
General