Overview of screens that appear
In this section, we explain the screens shown on the display of the H1essential.
Home Screen
This screen appears on the display when the H1essential power is turned on. This shows the state of the
H1essential, including recording status and input signal waveforms.
When recording starts, the name of the file being recorded is shown at the top of the screen.
❶
Status icon
The recording status is shown by an icon.
• Stopped
• Recording
❷
Available recording time / recorded time
This shows the available recording time when recording is paused and the current elapsed recording
time when recording.
❸
LO CUT indicator
This shows the LO CUT setting. Nothing will be shown when this is set to OFF. (→ Reducing noise (Lo
Cut))
❹
Remaining battery charge
This is shown when operating on batteries. When the remaining battery charge becomes low, replace
the batteries (→ Installing batteries) or connect an AC adapter (→ Connecting an AC adapter) or
portable battery (→ Using other power sources).
❺
Waveform display
This shows the waveforms of signals input into the H1essential.
Waveforms for both the L and R channels will be shown when stereo. A waveform that mixes the L and
R channels will be shown when mono. (→ Switching between stereo and mono)
11
To Next Page
Loading...
Need help?
General
