Making recording settings
Setting the sample rate
The sample rate used to record files can be set.
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use / to select “Rec Settings” and press to confirm.
3. Use / to select “Sample Rate” and press to confirm.
4. Use / to select the sample rate and press to confirm.
You can select from the following sample rates.
44.1 kHz, 48 kHz, 96 kHz
NOTE
• The only bit depth that can be used for recording is 32-bit float.
• During use as a USB mic, the sample rate will be 48 kHz regardless of this setting.
39
To Next Page
Loading...
