Zoom H1essential - Adjusting the Fixed Level

Adjusting the fixed level
The output level when “Volume Control” is set to “Fixed” can be adjusted. (→ Changing how the output level
is adjusted)
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use / to select “Output” and press to confirm.
3. Use / to select “Fixed Level” and press to confirm.
4. Use / to adjust the fixed level and press to confirm.
The setting value is shown on the display.
HINT
It can be set from –40 to +40.
5. To output a test tone from the H1essential and adjust the output level, press .
While checking the audio level meter of the connected device, adjust the input gain of that device until
the audio signal level is about −20 dB.
36