Making preparations
Inserting microSD cards
1. When the power is off, open the microSD card slot cover, and insert a microSD card with the logo
facing up all the way into the slot.
To remove a microSD card, push it further into the slot and then pull it out.
2. Close the microSD card slot cover.
NOTE
• Always make certain that the power is off when inserting or removing a microSD card. Inserting or
removing a card while the power is on could result in data loss.
• When inserting a microSD card, be sure to insert the correct end with the top side up.
• Recording and playback are not possible when a microSD card is not loaded in the H1essential.
• Always format microSD cards in order to maximize their performance after purchasing them new or
using them with a different device. (→ Formatting microSD cards)
• A message will open when a card that has not been used with the H1essential before is loaded in it.
The SD Card Screen will be shown. Then, test the SD card. (→ Testing microSD cards)
• The following types of recording media are supported.
- microSDHC: 4 GB – 32 GB
- microSDXC: 64 GB – 1 TB
18
To Next Page
Loading...
