Capturing audio before recording starts (pre-recording)
The input signal is always buffered for a set amount of time, so it can be captured (pre-recorded) for 2
seconds before the time when is operated to start recording.
This is useful when is operated late, for example.
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use / to select “Rec Settings” and press to confirm.
3. Use / to select “Pre Rec” and press to confirm.
4. Use / to select “On” and press to confirm.
NOTE
This cannot be used with the self timer. When pre-recording is enabled, the self-timer will be disabled. (→
Setting the self-timer)
40
To Next Page
Loading...
