4. Press .
This starts overdubbing.
■ Overdubbing operations
❶
Name of file being overdubbed
❷
Status icon
The overdubbing status is shown by an icon.
• Stopped
• Overdubbing
• Paused
• Playing back
❸
Overdubbing/elapsed playback time
❹
Return to the overdubbing file selection screen.
❺
, , , (low-frequency cut)
Pressing this cycles through the low-frequency cut settings.
OFF, 80 Hz, 160 Hz or 240 Hz can be selected.
❻
The playback volume can be adjusted in a range from −40 to 0 dB.
❼
This stops overdubbing.
87
To Next Page
Loading...
