Operating the H6essential from a
smartphone/tablet
The H6essential can be operated wirelessly from a smartphone or tablet by connecting a BTA-1 or other
dedicated wireless adapter and using the dedicated H6essential Control app.
NOTE
• The H6essential Control app must be installed on the smartphone or tablet beforehand. The H6essential
Control app can be downloaded from the App Store. Refer to the manual for the H6essential Control app
for details about app settings and operation procedures.
• The H6essential cannot be controlled wirelessly from a smartphone or tablet during audio interface
operation (→ Using as an audio interface).
• An H6essential cannot have both H6essential Control and an UltraSync BLUE connected at the same
time.
1. With the H6essential power off, remove the REMOTE connector cover on its front. Then, connect a
BTA-1 or other dedicated wireless adapter.
2. Slide toward until the display becomes active and the power turns on.
129
To Next Page
Loading...
