Setting the date format (first time starting up)
The first time the power is turned on after purchase as well as after the H6essential has been reset to
factory defaults, after setting the display language, set the date format when a screen to set it is shown.
The date written to recorded files will use the date format selected here.
1. Use to select a date format and press .
A specific example of the set date format will be shown at the bottom of the screen using the current
date setting.
Setting Explanation
YYMMDD The date is shown in year, month, day order.
MMDDYY The date is shown in month, day, year order.
DDMMYY The date is shown in day, month, year order.
After the date format setting is confirmed, set the date and time when a screen to set them opens. (→
Setting the date and time (first time starting up))
HINT
• The date format setting can also be changed later on the System Settings Screen. (→ Setting the date
format)
• Use to select and press to return to the previous setting screen.
42
To Next Page
Loading...
