Converting mic capsule input to mono
Mic capsule input can be mixed to a single channel and handled as mono audio.
1. On the Home Screen, use to select (Input) and press .
This opens the Input Settings Screen.
2. Use to select and press .
3. Use to select “Mono Mix”, and press .
4. Use to select On or Off, and press .
When "On” is selected, mic capsule input will become mono.
NOTE
The recording file format will be changed in the same way. (→ Folder and file structure)
• Set to “On”: mono files
• Set to “Off”: stereo files
48
To Next Page
Loading...
