Setting the type of batteries used (first time starting up)
The first time the power is turned on after purchase as well as after the H6essential has been reset to
factory defaults, after setting the date and time, set the type of batteries used in the H6essential when a
screen to set it is shown. This is necessary to accurately show the remaining battery charge on the display.
1. Use to select the battery type and press .
Setting Explanation
Alkaline Alkaline batteries
Ni-MH Nickel-metal hydride batteries
Lithium Lithium batteries
After first-time settings are complete, the Home Screen will open.
HINT
• The battery type setting can be changed later on the Setting Screen. (→ Setting the type of batteries used)
• Use to select and press to return to the previous setting screen.
45
To Next Page
Loading...
