36
Recording and playback
Playing recordings
button
button
1. Press for the channels you want to play, lighting these buttons
green.
2. Press to start playback.
Lit: Playing back
3. Press to stop playback.
NOTE
• Playback signals are added before the equalizer section, so their EQ and panning settings can be adjusted
during playback. (
→
P.7)
• Selecting projects for playback (
→
P.46)
• Changing the playback mode (
→
P.80)
Other channels cannot be played back when the MASTER channel is playing back.
To Next Page
Loading...
