Zoom MultiStomp MS-50G User Manual

16
Tapping the Tempo
Tapping the Tempo
Delay effects and some modulation and filter effects can
be synchronized to the tempo. Select an effect that can be
synchronized, and set its Time, Rate or other parameter that
can be synchronized to a or note value.
The tempo can be set by tapping the footswitch or a knob.
1. Open the Tap Tempo Screen.
3. Complete the setting.
2. Tap the footswitch 2 or more times at the
desired tempo.
1
To set the tempo by tapping the
footswitch
NOTE
t *G ZPV QSFTTUIFGPPUTXJUDIXIFOUIF FGGFDUJT0/
the ON/OFF indicator becomes unlit and the effect
turns OFF for 1 second.
NOTE
t #ZEFGBVMUwhen pressed and held, the footswitch
is set to activate the Tuner. To tap the tempo with
the footswitch, the setting must be changed so that
it activates Tap Tempo when pressed and held.
(See page 18.)
The ON/OFF indicator flashes in time with the
tempo.
Press
and
hold
for 1 second
Press
and
hold
for 1 second

Zoom MultiStomp MS-50G Specifications

General

Simultaneous Effects	6
Display	LCD
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Patches	50
Input	1/4"
Output	1/4"
Power	9V DC
Weight	350 g (without batteries)
Frequency Response	20Hz - 20kHz
Power Supply	Batteries: AA/LR6 battery x 2
Battery Life	Approx. 6 hours (alkaline batteries)
Effect Types	Delay, Reverb, Modulation, Distortion, EQ, Filter, Dynamics