Zoom MultiStomp MS-50G User Manual

18
Changing Various Settings
Changing Various Settings
1. Open the MENU.
2. Select SETTINGS.
1
To change various settings
Press
Turn
Press
1. Select HOLD FOR TUNER/TAP from the SETTINGS
menu.
2. Set the function activated by pressing and
holding the footswitch
Turn
Turn
Press
Press
Set the function activated by pressing the footswitch
continuously for 1 second to TUNER or TAP TEMPO.
2
To set the function activated by
pressing and holding the footswitch
HINT
t 56/&3"DUJWBUFTUIF5VOFSEFGBVMUTFUUJOH
t 5"15&.10"DUJWBUFT5BQ5FNQP
NOTE
t 5IFTFTFUUJOHTBSFTIBSFECZBMMQBUDINFNPSJFT

Zoom MultiStomp MS-50G Specifications

General

Simultaneous Effects	6
Display	LCD
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Patches	50
Input	1/4"
Output	1/4"
Power	9V DC
Weight	350 g (without batteries)
Frequency Response	20Hz - 20kHz
Power Supply	Batteries: AA/LR6 battery x 2
Battery Life	Approx. 6 hours (alkaline batteries)
Effect Types	Delay, Reverb, Modulation, Distortion, EQ, Filter, Dynamics