Zoom MultiStomp MS-50G User Manual

10
t 5VSOUPNPWFUIFDVSTPS
t 5VSOUPDIBOHFUIFDIBSBDUFS
t  
t  
Selecting and Saving Patch Memories
Selecting and Saving Patch Memories
Press to change the type
of character/symbol
Turn to select where to save
the patch memory
2
To save a patch memory with a
new name
1. Open the MEMORY list.
1. Open the MEMORY list.
2. Select a patch memory.
1
To select a patch memory
Press
Press
When shipped from the factory, the automatic patch
memory saving function is active. As soon as a
parameter is adjusted this change is automatically saved.
Turn
Confirm that the Home Screen is shown. 2. Select the patch memory to be saved with a new name.
3. Change the name and select
where to save the patch
memory.
Turn
Press
4. Save the patch memory with the new name.
Press

Zoom MultiStomp MS-50G Specifications

General

Simultaneous Effects	6
Display	LCD
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Patches	50
Input	1/4"
Output	1/4"
Power	9V DC
Weight	350 g (without batteries)
Frequency Response	20Hz - 20kHz
Power Supply	Batteries: AA/LR6 battery x 2
Battery Life	Approx. 6 hours (alkaline batteries)
Effect Types	Delay, Reverb, Modulation, Distortion, EQ, Filter, Dynamics