Zoom MultiStomp MS-50G - System Settings: Auto Save and Battery; Auto Save Function Control; Battery Type Selection

20
Changing Various Settings
Changing Various Settings
1. Select AUTO SAVE from the SETTINGS menu.
2. Set the Auto Save function.
5
To set the Auto Save function
Turn
Turn
Press
1. Select BATTERY TYPE from the SETTINGS menu.
2. Set the type of batteries used.
6
To select the battery type
Turn
Turn
Press
HINT
t :PVDBODPOmSNUIFSFNBJOJOH
battery charge on the MENU.
t
"Low Battery!" appears when the
batteries need to be changed.
HINT
t 0/EFGBVMU$IBOHFTUP QSFTFUT BSFBVUPNBUJDBMMZ
saved.
t 0''$IBOHFTUPQSFTFUTBSFOPUTBWFEVOUJMUIFZBSF
saved manually.

(See page 10.)
Press Press