Using the Tuner (Tuner Mode)
ZOOM PFX-9003
21
closest to the current pitch. The dot (
●
) symbols in the lower section of the
display let you check the pitch.
Tune the string to achieve the desired note.
3.
Tune the other strings in the same way.
4.
To return to play mode, press the [EDIT/CANCEL] key.
Using other tuning types
The PFX-9003 allows various other tuning types besides chromatic tuning.
For these types it is necessary to first select a string number and then tune the
string corresponding to the displayed note.
1.
In tuner mode, press the [TUNER/BYPASS] key several times to
select the tuning type.
With each push of the key, the tuning type cycles through the settings shown
in the chart on the next page. (The name of the new tuning type is briefly
shown on the display.)
A
CR
Note name
Pitch sharp/flat
indication
Pitch is flat Correct pitch Pitch is sharp