ZOOM PFX-9003
40
Other Functions
Returning the unit to the factory default settings
The patches in the user banks can be returned to their original condition at any
time, even if you have changed them.
There are two ways of restoring factory defaults. "All Initialize" returns all
user bank patches to the original condition. "Factory Recall" restores only a
specific patch to the original condition.
1.
Turn power to the PFX-9003 on while holding down the [STORE/
EXECUTE] key.
The indication "ALINIT" appears on the display.
•To perform All Initialize, proceed to step 2.
•To perform Factory Recall, use the CURSOR [
Q
]/[
W
] keys and the
PATCH [
Q
]/[
W
] keys to select the user patch that you want to return
to the original condition.
2.
Press the [STORE/EXECUTE] key once more.
The All Initialize or Factory Recall operation is carried out. After All
Initialize, the unit automatically switches to play mode. All patches that were
modified and stored by the user are lost.
To cancel All Initialize or Factory Recall, press the [EDIT/CANCEL] key
before step 2.
ALINIT
[STORE/EXECUTE] key
To Next Page
Loading...
Need help?
General
