Using the Tuner (Tuner Mode)
ZOOM PFX-9003
22
For example, when GUITAR has been selected as tuning type, the display
shows the string number and the target note.
2.
Play the indicated string as an open string, and perform tuning.
3.
Use the CURSOR [
Q
]/[
W
] keys to select another string number.
For example, when GUITAR has been selected as tuning type, pressing the
CURSOR [W] key cycles through the following string numbers.
6E
→
5A
→
4D
→
3G
→
2B
→
1E
→
7B
→
6E ...
4.
Tune the other strings in the same way.
Changing the reference pitch of the tuner
After power to the unit was turned on, the reference pitch of the built-in tuner
is always center A = 440 Hz. If desired, you can change this in 1-Hz steps over
the following range: center A = 435 – 445 Hz. You can also select "half-step
Tuning type GUITAR BASS OPEN-A OPEN-D OPEN-E OPEN-G
DADGA
(D modal)
String/note
name
6E 4E 6E 6D 6E 6D 6D
5A 3A 5A 5A 5B 5G 5A
4D 2D 4E 4D 4E 4D 4D
3G 1G 3A
3F
#
3G
#
3G 3G
2B 5B
2C
#
2A 2B 2B 2A
1E 1E 1D 1E 1D 1D
7B
String number Target note
Tuning type
6E
GT
To Next Page
Loading...
Need help?
General
