ZOOM PFX-9003
4
Terms Used in This Manual
This section explains some important terms that are used in this manual.
■ Effect module
An "effect module" works like a stand-alone compact effect device for
tailoring certain aspects of the sound. As shown in the illustration below, the
PFX-9003 can be thought of as a series of such effect modules.
■ Effect types and parameters
Different types of sound within a module are called effect types. In most
modules, you can select one effect type from several choices. The various
settings of the effect module are called parameters.
■ Patches and banks
Effect module combinations and effect
parameter settings are stored and
recalled in units called "patches".
These are divided into user banks (A –
F) which can be changed, and preset
banks (0 – 5) which are read-only.
Because each bank has 10 patches
(numbered from 0 – 9), there are 120
patches in all.
■ Modes
Operation of the PFX-9003 is divided into various modes, which are used for
different purposes. There is a play mode for selecting and playing patches, an
edit mode for changing parameters, a tuner mode for using the built-in tuner,
a sampler mode for recording, etc.
INPUT OUTPUT
DRIVECOMP EQZNR REVMOD
PRESET BANK
BANK F
BANK E
BANK d
BANK C
BANK b
USER BANK
BANK A
BANK 5
BANK 4
BANK 3
BANK 2
BANK 1
BANK 0
PATCH 0
PATCH 1
PATCH 8
PATCH 9
PATCH 0
PATCH 1
PATCH 8
PATCH 9
To Next Page
Loading...
Need help?
General
