Zoom PFX-9003 - Selecting Target and Executing Operation

Storing and Swapping Patches (Store Mode)
ZOOM PFX-9003
34
N OTE
If the original patch is from a preset bank, the "SWAP" option cannot be selected.
3. Use the CURSOR [ Q ]/[ W ] keys and the PATCH [ Q ]/[ W ] keys to
select the bank and patch number of the store/swap target.
N OTE
A preset bank cannot be selected as store target. If you press the [STORE] key
while a patch from a preset bank is selected, the selection automatically changes to
"A0" (patch number 0 in user bank A).
4. Press the [STORE] key once more.
The store or swap operation is performed and the unit returns to the original
mode. If the patch in step 1 was being edited, the editing changes are stored
and the "ED" indication disappears.
If you press the [EDIT/CANCEL] key instead of the [STORE] key, the store/
swap operation is canceled and the unit returns to the original mode.