Using the ARRM Function
ZOOM PFX-9003
39
9.
Call up the control target module and adjust the effect type and
parameter as necessary.
For information about the parameter that can be controlled by ARRM when
the DRIVE, MOD, or REV module is selected, see page 42.
10
.
When the setting is complete, press the [EDIT/CANCEL] key to
return to the play mode.
The ARRM function settings are stored separately for each patch. Store the
patch if you want to retain the settings.
11
.
Check the effect while playing your instrument.
The effect parameter value varies cyclically according to the selected control
waveform.
To Next Page
Loading...
