Zoom PFX-9003 - Page 43

Effect Types and Parameters
ZOOM PFX-9003
43
* Parameters for type SANS B to type 9002 are the same.
SANS B
Trebly drive sound for bass.
CR
Model simulation of vintage crunch.
TS
Model simulation of vintage overdrive.
GV
Model simulation of vintage distortion.
MTZONE
High-gain distortion with rich sustain.
9002
Simulates the ZOOM 9002 distortion.
Parameter 1: GAIN [A]
Parameter 2: TONE Parameter 3: LEVEL
Parameter 4: CABI Parameter 5: SPEAKR Parameter 6: DEPTH
AC SIM
Transforms the sound of an electric guitar into an acoustic-guitar-like tone.
Parameter 1: TOP [A]
Parameter 2: BODY Parameter 3: LEVEL
Parameter 4: CABI Parameter 5: SPEAKR Parameter 6: DEPTH
CABI
Simulates the cabinet of a guitar/bass amp.
Parameter 1: CABI Parameter 2: SPEAKR
Parameter 3: DEPTH [A]
MICPRE
Preamplifier for mic use.
Parameter 1: COLOR Parameter 2: HPF
P arameter 3: LEVEL [A]
Parameter 4: CABI Parameter 5: SPEAKR Parameter 6: DEPTH
Parameter description
Parameter name Setting range Explanation
GAIN
1 – 30
Adjusts the distortion gain.
TONE
0 – 10
Adjusts the tone.
LEVEL
1 – 8
Adjusts the module output level.
CABI
See table 1
Selects the cabinet type.
SPEAKR
See table 2
Selects the speaker type.
DEPTH
0 – 10
Adjusts the intensity of the cabinet sound.
TOP
1 – 30
Adjusts the resonance of the strings.
BODY
0 – 10
Adjusts the resonance of the body.
COLOR
See table 3
Selects the mic preamp characteristics.
HPF
0 – 10
Sets the high-pass filter frequency.
Table 1: CABI
CM
Combo: Simulation of a combo-type cabinet.
br
Bright Combo: Produces a brighter tone than Combo.
Ft
Flat: A cabinet with a flat response.
St
Stack: Produces the character of a stack-type cabinet.
bC
BassCombo: The sound of a combo-type cabinet for bass.
bS
BassStack: The sound of a stack-type cabinet for bass.
Table 2: SPEAKR
C1
Combo 1: The sound of a combo-type guitar amp with one 12 inch speaker.