Zoom V3 User Manual

14
Making unit settings
See the table below for setting items and values.
1.
While pressing and holding , or , set to ON.
The pressed button will blink.
2.
Turn .
The lit LED position shows the setting value.
3.
Press the blinking button.
This saves the setting, and restarts the
V3
.
Pressing a button that is not blinking will cancel the setting.
Setting item and
button pressed
at startup
Setting range Explanation
Standard pitch
adjustment
435 Hz
440 Hz
445 Hz
This can be adjusted in 1 Hz intervals.
This adjusts the standard pitch used for correcting
vocal pitch and adding harmony.
Note: The pitch used for “A” (La) is expressed
in hertz (Hz). Vocal and harmony pitches can be
matched to the instruments being played together
by setting the standard pitch used by the
V3
to
the same pitch.
Battery setting
Alkaline
batteries
Nickel-metal hydride batteries
Lithium
batteries
Set the type of battery used correctly so that
the amount of remaining battery charge can be
shown accurately.
ECO mode
setting
Off On
This function can be used to turn the power off
automatically if unused for 10 hours.
■
Restoring factory default settings
1.
While pressing and holding , set to ON.
The pressed button will blink.
2.
Press .
This restores factory default settings and restarts the
V3
. Pressing anything other than will
cancel initialization.
Initialization will overwrite all settings to their factory defaults. Be certain before using this
function.

Zoom V3 Specifications

Power

AC adapter voltage	9V DC
AC adapter current	500 mA
phantom power	+48 V
battery type	4 AA batteries
battery life	3.5 hours

Inputs and Outputs

MIC IN input gain	+3 – 40 dB
MIC IN maximum input level	+4 dBu
MIC IN input impedance	3 kΩ or more
AUX IN rated input level	−10 dBu
AUX IN input impedance	22 kΩ
L/R output maximum level	+6 dBu
L/R output impedance	100 Ω
PHONES maximum output	20 mW + 20 mW (into 32 Ω load)

Audio Specifications

sampling frequency	44.1 kHz
A/D conversion	24-bit 128× oversampling
D/A conversion	24-bit 128× oversampling
signal processing	32-bit
frequency response	20 Hz – 20 kHz (+1 dB/−3 dB)

Weight and Dimensions

weight	0.59 kg
depth	150 mm
width	190 mm
height	50 mm