Configuration
02060220.fm 11.12.07/Ch,Kx Network T8 Control Unit – Version 2.0 2 - 15
When using a user account
The name of the user account previously set up as an example was
Net-User. The network user name must then also be Net-User!
Figure 2.13:
T8 control unit,
entering network
user name
Close the menu dialog by pressing the [OK] or [ESC] keys on the cursor pad. Press
the
[OK] key to accept the new network user name. If the [ESC] key is pressed,
the new network user name is not accepted.
02060015
To Next Page
Loading...
