Configuration
02060220.fm 11.12.07/Ch,Kx Network T8 Control Unit – Version 2.0 2 - 29
Typical application 3: special configuration
Network comprising:
• Machine 1 with T8 control unit
• Machine 2 with T8 control unit
• Machine n with T8 control unit
• A PC with GiS BasePac software (referred to as GISPC in the following)
• Additional PC containing the data exchange directories (e.g. a server)
These three typical applications are each subdivided into 4 operations that need to
be carried out. Details of how to carry out these operations are contained in the
following sections and in Chapter 3. Network operation with GiS BasePac soft-
ware.
The 4 necessary operations are stated below, together with the relevant section
numbers:
1. Create data exchange directory Kapitel 2.6
2. Enable data exchange directory for network operation Kapitel 2.6
3. Set up the access path for the GiS software to the data exchange
directory Kapitel 2.7
4. Set up network connection at T8 control units Kapitel 3.1.2 and
Kapitel 3.2.1
To Next Page
Loading...
