ZSK T8 - Variant 2

Network operation with GiS BasePac software
3 - 4 Network T8 Control Unit – Version 2.0 02060420.fm 11.12.07/Ch,Kx
Variant 2
NOTE
Variant 2 is not available in Simple operation mode.
Figure 3.7:
T8 control unit,
machine basic screen
• Press [L4] Design manager.
Figure 3.8:
T8 control unit,
Disk/memory/network/
USB device,
Variant 2
• Press [L3] Load design from network key.
NOTE
The following sequence applies to both variants.
02060005
02060024