Network operation with GiS BasePac software
02060420.fm 11.12.07/Ch,Kx Network T8 Control Unit – Version 2.0 3 - 11
NOTE
The following sequence applies to both variants.
D The display area changes to the machine basic screen once the connec-
tion has been created. The active monogram machine mode is indicat-
ed by a symbol in this display.
Figure 3.20:
T8 control unit,
machine basic screen
D The machine awaits the transfer of a design by the GiS BasePac or GiS
Production Manager software.
02060031
To Next Page
Loading...
