Zte MF288 - Firewall Port Forwarding

ZTE MF288 User Guide
Confidential and Proprietary Information of ZTE CORPORATION 19

MAC Address: Set the MAC address that will be filtered.

Source IP Address: Set the source IP address that will be filtered.

Dest. IP Address: Set the destination IP address that will be filtered.

Protocol: Set which protocol will be used for filtering.

Action: Set how to handle the packet if it matches with the rule.

Comment: Type a comment for the filter settings.
NOTE:
If rules are in conflict with each other, the first to be triggered will determine how that traffic is
handled.
Click Apply to confirm your configuration.
Click Delete to delete the rule which you selected.
To add a new rule:
1. Select Enable in the Port Filtering area.
2. Click Apply.
3. Input the detailed information in the MAC/IP/Port Filtering Settings area.
4. Click Apply in the MAC/IP/Port Filtering Settings area.
Port Forwarding
You can set up virtual servers to provide services on the Internet.
Select Advanced Settings > Firewall > Port Forwarding
The virtual server settings is shown in the following figures.