Zte WARP 7 - Page 286

Settings 232
 Your phone is connected to the Wi-Fi network. You will see ( ) in the status bar.
 The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
 Entering a password is not required if an access point is not security protected.
Advanced Wi-Fi Settings
The advanced Wi-Fi settings menu lets you set up and manage wireless access points.
● Enable Notification when Open Networks Are Available: From Wi-Fi settings, tap Menu >
Advanced and tap the Network notification slider.
 The setting is available when Wi-Fi is turned on.
 Tap Network notification to turn the option on or off.
● Allow Some Services to Scan for Networks even when Wi-Fi is Off: From Wi-Fi settings, tap
Menu > Advanced and tap the Scanning always available slider.
 Tap Scanning always available to turn the option on or off.
● Set Timing for Pausing a Connection: From Wi-Fi settings, tap Menu > Advanced > Keep
Wi-Fi on during sleep and then select a setting.
● Install Certificates for Secured Wi-Fi Networks: From Wi-Fi settings, tap Menu > Advanced >
Install certificates and then select the file to install.
● Use Wi-Fi Direct: From Wi-Fi settings, tap Menu > Advanced > Wi-Fi Direct.
 The setting is available when Wi-Fi is turned on.
 For more information, see Wi-Fi Direct.
● Use WPS to Connect to a Wi-Fi Network: From Wi-Fi settings, tap Menu > Advanced >
WPS Push Button or WPS Pin Entry.
 The settings are available when Wi-Fi is turned on.
 If you tap WPS Push Button, press the WPS button on the access point and the access
point will recognize your phone and add it to the network.
 If you tap WPS Pin Entry, enter the PIN number displayed on the phone into the access
point's setup page. Your phone automatically finds the access point and configures the
connection.
Note: For detailed information about the WPS feature of the access point, please refer to its user
documents.