Zte ZXR10 2928E-PS

ZXR102900ESeriesCongurationGuide
CommandFunction
zte(cfg-nas)#dot1xre-authenticate{enable|disable}
Enablesordisablesre-authentication
function.
zte(cfg-nas)#dot1xre-authenticateperiod<1-4294967295>
Setsthetimeintervalof
re-authentication.
zte(cfg-nas)#dot1xquiet-period<0-65535>Setsquietperiodofauthentication.
zte(cfg-nas)#dot1xtx-period<1-65535>
Setsthetimethattheauthentication
systemneedstowaitbeforeitcan
retransmittheEAPOLdatapacket
becauseitdoesnotreceivethe
responsefromtheclient.
zte(cfg-nas)#dot1xsupplicant-timeout<1-65535>
Setsthetime-outtimeforthe
authenticationsystemtoreceivethe
datapacketsfromtheauthentication
clientsystem.
zte(cfg-nas)#dot1xserver-timeout<1-65535>
Setsthetime-outtimeforthe
authenticationsystemtoreceivethe
datapacketsfromtheauthentication
server.
zte(cfg-nas)#dot1xmax-request<1-10>
Setsthemaximumtimesofrequest
retransmittingwhenthetimerexpires
beforetheauthenticationsystem
receivestheChallengeresponsefrom
theclient.
zte(cfg-nas)#dot1xaddvlan<1-4094>[mac<HH.HH.HH.HH.HH.HH>]
SetstheprivateMACaddressthat
DOT1Xprotocolcanuse.
zte(cfg-nas)#dot1xdeletevlan<1-4094>
DeletestheprivateMACaddressthat
DOT1Xprotocolcanuse.
zte(cfg-nas)#clearclientDeletesallclients.
zte(cfg-nas)#clearclientindex<0-255>Clearsthespeciedclient.
zte(cfg-nas)#clearclient{port<portlist>|vlan<vlanlist>}
Deletestheclientenduserofspecied
port/VLAN.
showdot1x(allcongurationmodes)
Displays802.1xconguration
information.
showclient(allcongurationmodes)
Displaystheinformationofallaccess
users.
showclientindex<0-255>(allcongurationmodes)
Displaystheinformationofanaccessing
users
4-70
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential