Zte ZXR10 2928E-PS

ZXR102900ESeriesCongurationGuide
CommandFunction
zte(cfg)#setTelnetserver{enable|disable}
Enables/disablestheT elnetserver
function,whichisenabledbydefault.
showTelnet(forallcongurationmodes)
DisplaystheT elnetcongurationand
status.
TelnetCongurationInstance
lCongurationDescription
SeeFigure5-39,aswitchhasalayer-3portwiththeIPaddress192.168.1.1/24,and
thehostIPaddressis192.168.1.100/24.Thehostremotelylogsintotheswitch
throughTelnet.
Figure5-39TelnetLoginInstance
lCongurationProcedure
1.Conguretheswitch
Bydefault,theT elnetserverfunctionisenabled.Youcanusethefollowing
commandtomakesurethatthefunctionisenabled.
zte(cfg)#showTelnet
Telnetserverisenable
2.CongurethePC
Note:
Windows2000providestheTelnetclientandserverprograms.Telnet.exe
istheclientprogramandtlntsvr.exeistheserverprogram.Inaddition,
Windows2000providestheT elnetservermanagementprogramtlntadmn.exe.
Bydefault,theTelnetserviceisinstalledinWindows2000.
5-46
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential