Zte ZXR10 2928E-PS

ZXR102900ESeriesCongurationGuide
CommandFunction
zte(cfg)#setsyslog{enable|disable}
Enablesordisablessyslogfunctionat
theglobalmode.
showsyslogstatus(allcongurationmodes)Displayscongurationofsyslog.
SyslogCongurationInstance
lCongurationDescription
Supposethatsyslogfunctionofswitchisenabled,informationlevelisinformational,
allfunctionmodulesareenabled,serverIPaddressis192.168.1.1,nameisSrv1.
lCongurationProcedure
zte(cfg)#setsyslogenable
zte(cfg)#setsysloglevelinformational
zte(cfg)#setsyslogmodulealldisable
zte(cfg)#setsyslogmoduleradiusenable
zte(cfg)#setsyslogmoduleaaaenable
zte(cfg)#setsyslogmodulecommandlogenable
zte(cfg)#setsyslogaddserver1ipaddress192.168.1.1nameserver1
lCongurationVerication
zte(cfg)#showsyslogstatus
Syslogstatus:enable
Sysloglevel:informational
Syslogenabledmodules:
commandlogAAAradius
Syslogdisabledmodules:
all-others
SyslogserverIPUDPportName
1192.168.1.1514server1
4.23NTPConguration
NTPOverview
NTPistheprotocolusedtosynchronizetheclocksbetweennetworkdevices.ZXR10
2900EprovidesNTPclientfunctionandsynchronizestheclockwithotherNTPservers.
ConguringNTP
TheNTPcongurationincludesthefollowingcommands:
CommandFunction
zte(cfg)#setntpaddauthentication-key<1-255>md5<string>SetsNTPauthentication-key.
zte(cfg)#setntpdeleteauthentication-key<1-255>DeletesNTPauthentication-key.
4-78
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential