Zte ZXR10 2928E-PS

Chapter5Management
CommandFunction
zte(cfg-snmp)#sethost<A.B.C.D>trap{v1<string>|v2c<string>|
v3<string>{auth|noauth|priv}}
SetsIPaddress,groupname,
usernameandversionoftraphost
andinformhost.
zte(cfg-snmp)#sethost<A.B.C.D>inform{v2c<string>|v3
<string>{auth|noauth|priv}}
SetshostIPaddress,groupname,
usernameandversionofinform.
zte(cfg-snmp)#settrap{linkdown|linkup|authenticationfail
|coldstart|warmstart|topologychange|memberupdown
|portloopdetect|trunkloopdetect|linkMonitorStatus|
remoteLinkStatus|dyingGaspStatus|remoteDiscovery|
powerDown|dhcpCharCheck|cpuUserationThreshold|
memUserationThreshold|fanStatusCheck|macNotification|
udldUnidirectional|protocolProtect|dismanpingnotifications|
adminPasswordNoChange|arpOverload|bootfileLost
|cfmFaultAlarm|fanSpeed|fileTransfer|ipConflict|
MacOverload|poe|StpBridgeRoleChange|StpPortStateChange
|temperature|all}{enable|disable}
Enables/disablesthefunctionto
traplinkconnection/disconnection,
authenticationfailure,cool/hot
start/topologychange,trunk
memberUP/DOWN,loopback
detectedatport/Trunk,MAC
numberexceedingthethreshold,
linkmonitoreventalarms,remote
linkeventalarms,eventdetection
alarms,MAClistvariation
notication,andpingnotication.
zte(cfg-snmp)#setgroup<string>v3{auth|noauth|priv}[read
<string>[write<string>[notify<string>]]]
SetstheSNMPV3groupname
andgroupsecuritylevel.
zte(cfg-snmp)#setuser<string><string>v3[md5-auth<string>|
sha-auth<string>[des56-priv<string>]]
SetsSNMPv3username,
authenticationmodeandpassword
zte(cfg-snmp)#settrapmacnotification{port<1-51>|
trunk<1-15>}{enable|disable}
EnablesordisablesMACchange
noticationfunctiononaspecic
portortrunk.
zte(cfg-snmp)#settrapmacnotification{history-size<1-256>|
interval<1-3600>}
Setsthenumberandintervalof
MACchangenotications.
zte(cfg-snmp)#clearhost<A.B.C.D>{trap|inform}<string>Clearsahostconguration.
zte(cfg-snmp)#clearcommunity<string>Clearsacommunityname.
zte(cfg-snmp)#clearview<string>Clearsaview.
zte(cfg-snmp)#cleargroup<string>v3{auth|noauth|priv}Clearsagroup.
zte(cfg-snmp)#clearuser<string>v3Clearsauser.
zte(cfg-snmp)#clearengineID
ClearsSNMPengineidentierand
recoversdefaultvalue.
showsnmp(allcongurationmodes)
DisplaysallSNMPconguration
information.
showsnmp{community|engineID|group|host|trap|user|
view}(allcongurationmodes)
DisplayseachelementofSNMP
V1,V2CandV3.
5-9
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential